The EarthPulse™ v6 Basic system includes:
One v6 Basic Controller (one output jack)
One Electromagnet (Only inner coil or Air-core for Basic Lite and Full electromagnet with metal housing and outer ring for Basic)
One 100-240 volt AC to 12 volt DC Power Supply that will reduce EMF and RF picked up from your building
4 pin adapters for all regions
One v6 padded, clear-side travel case
Add extra magnet (and included splitter cable) and have a 30% lower amplitude ProBasic
- Software controlled amplitude; from 10% – 100% to help acclimation for EMF sensitive people;
- Manual-Frequency Mode for choosing one frequency for up to 12 hours;
- Addition of 1 hour buffer at 14.4 Hz to help you wake more effectively without sleeping through shut-down;
- L-shaped cable tips for easier transportability and longer plug life.
- 1100 Gauss (110 Gauss for Basic Lite) nano-second peak magnetic field intensity
The inventor and much of the staff currently use Manual-Mode; usually set at 9.6 Hz or it’s lower harmonics when too much caffeine before bed @ 4.8 Hz or 3.6 Hz Theta, or 2.4 Hz or 1.2 Hz Delta. See our page Why 9.6 Hz? to find out why.
You don’t want a wearable battery operated tinker toy from any other brand just to save $50 when looking to buy a PEMF device. Replacing burned out pads, charging batteries, limiting yourself to just two frequencies (one very low, one very high), no wake up function, limited output amplitude, narrow pulse width. If the EP does for you, what it’s done for our clients since 2002,…you don’t need a daytime system!
v6 Basic is great for sleep, recovery, pets; basically does everything our full function v6 does without the stepping up and down Sleep, Alert, Recovery and Entrainment Modes. It’s the best deal on the PEMF-planet!
Decisions, decisions. If you have questions just drop us an email.